Shopping Cart


Your shopping bag is empty

Go to the shop
McIntosh Labs MA252 - 2 Channel Integrated Amplifier
McIntosh Labs MA252 - 2 Channel Integrated Amplifier
McIntosh Labs MA252 - 2 Channel Integrated Amplifier
McIntosh Labs MA252 - 2 Channel Integrated Amplifier
McIntosh Labs MA252 - 2 Channel Integrated Amplifier

McIntosh Labs MA252 - 2 Channel Integrated Amplifier

Rs. 499,900.00

In stock


  • Includes our Hybrid Drive™ technology that uses the best of vacuum tubes and solid state to produce the best sound performance

  • Vacuum tube preamplifier and solid state power amplifier

  • 100 Watts into 8 Ohms

  • 160 Watts into 4 Ohms

The MA252 Integrated Amplifier is the first hybrid integrated amplifier from McIntosh. Taking retro design cues from the legendary McIntosh MC275 Vacuum Tube Amplifier, the MA252 combines the best of vacuum tube and solid state circuit design to create an amplifier that’s both visually and sonically stunning.

The preamplifier stage uses two 12AX7a and two 12AT7 vacuum tubes housed inside stylish protective cages; the output stage is a direct coupled solid state amplifier that delivers 100 Watts per channel into 8 Ohm speakers or 160 Watts per channel into 4 Ohm speakers. An all analog design, it comes with 2 unbalanced, 1 balanced and 1 Moving Magnet phono input for turntables. All 4 inputs can be given user-friendly names in order to simplify user control. Bass and treble tone controls help fine tune your music to your personal preferences. A full range subwoofer output is included for use with a powered subwoofer to further enhance low frequencies.

The MA252 features McIntosh Monogrammed Heatsinks™ which are connected to advanced high current output transistors. These transistors eliminate the typical amplifier warm-up time so that the MA252 is in peak operating condition from the moment it’s turned on. A powerful control microprocessor is used for smooth system operation, along with some of the latest audio-grade circuit components that deliver the best possible sound.

Thanks to its solid state output, the MA252 is McIntosh Labs first product containing vacuum tubes to include their patented Power Guard® technology. Power Guard monitors the output signal for signs of over driving and makes real time micro adjustments to the input signal to prevent harsh sounding clipping that could potentially damage your speakers. If Power Guard is activated, the 2 vacuum tubes connected to the affected audio channel(s) will flash an amber color; they will return to their normal green color when the clipping has stopped.

Other McIntosh technologies found in the MA252 include Sentry Monitor™, High Drive headphone amplifier and gold-plated speaker binding posts. Input selection, bass, treble, tone bypass, balance and input offset levels can be adjusted using the front panel knobs or the included remote control; all settings and input selection will be shown on the OLED display. The entire unit sits atop a beautiful polished stainless steel chassis with a classic McIntosh-styled die cast aluminum name badge attached to each side.


  • Power Output per Channel - 100 Watts into 8 Ohms,160 Watts into 4 Ohms

  • Number of Channels - 2

  • Speaker Impedance - 4 or 8 Ohms

  • Rated Power Band - 20Hz to 20kHz

  • Total Harmonic Distortion - 0.03%

  • Dynamic Headroom - 1.8dB

  • Frequency Response +0,-0.5dB - 20Hz to 20kHz

  • Frequency Response, +0, -3dB - 10Hz to 100kHz

  • Sensitivity Phono (Moving Coil) - N/A

  • Sensitivity Phono (Moving Magnet) - 3.0mV

  • Sensitivity High Level (Balanced / Unbalanced) - 0.6V/0.3V

  • Signal To Noise Ratio (Moving Magnet) - 80dB

  • Signal To Noise Ratio (High Level) - 97dB

  • Signal To Noise Ratio (Power Amp input) - N/A

  • Input Impedance (Balanced / Unbalanced) - 20K/20K

  • Damping Factor - 8 Ohms: >200,4 Ohms: >100

  • Maximum Output (Balanced / Unbalanced) - 8V Unbalanced

  • Power Requirement - 120V 50/60Hz, 3.7A

  • Standby Power Requirement - <0.5 Watts

  • Dimensions (W x H x D) - 12" (30.5cm) x 7-5/8" (19.4cm) x 18" (45.7cm)

  • Weight - 28 lbs (12.7 kg)


  • McIntosh Labs MA252 - 2 Channel Integrated Amplifier

  • Limited 1-Year Manufacturer Warranty

In-Store Pickup

Official Offline And Online Retailers

In-House Experts

Shipped FREE to your Door


High-Fidelity Audio

Delving into the realm of unparalleled audio experiences, enthusiasts invest in top-quality source components, amplification, and precision-engineered speakers or headphones. With advancements like DSP and wireless technologies, audiophiles passionately pursue an authentic, true-to-life sound journey.

Comfortable Designs

Our products prioritize ergonomic design, offering customized fits, lightweight materials, and adjustable features. From earphones with tailored ear tips to Speakers with even weight distribution, our products strive to enhance user comfort for prolonged, enjoyable listening experiences.
DJ Spinning